There is no limit of entries anymore concerning the export as XML,CSV or PDF (Previously there was a limit of 20000 entries). But keep in mind, that the creation of large reports will take a considerable amount of time and load. Depending on your hardware the download of very large reports may take several minutes and currently no feedback is given by the service when a „Download report“ request is made. (This will be added in future versions).
time: the node contains a formatted time string of the local time
object: the PBX object name (also called cn)
conference id: the conference id of the call
call: int (internal) or ext (external) call
Original Called,: In case of Call flow; The original called device
Diverting,: In case of Call flow; The diverting device
Transferring,: In case of Call flow; The transferring device
node: the node of the PBX object
pbx: the pbx of the PBX object
phys: physical location name of the pbx
cause: the decimal disconnect reason of the call (see Reference:ISDN_Cause_Codes)
remote:
outgoing calls → dialed endpoint
incoming calls → first ep2 above entry event or entry event if this is the first one
incoming calls with incoming transfer after entry event → transfer target
status:
type: the type of the entry event or, if not set, the type of the next event, if given
direction: o (outgoing) if the first event is the entry event and the caller is ep1
direction: i (incoming) if not o
alert-duration: alert time
Billing Duration: the duration, a user must be billed for
call-duration/Call Duration (Total): duration of the whole call, e.g. with the duration of a subsequent transfer
conn-duration/Call Duration (User): just the time, the user was connected. Duration from the entry event until the event, where the local endpoint isn't connected any more
Further Registration: If more than one devices is registered to the same object, each device creates a CDR. This field identifies the additional CDRs for the same call
Object Info: combination of object names and number
Date: extracted date only from the time_string
Time_2: extracted time only from the time_string